smartpro 230v 5kva 3.75kw line-interactive sine wave ups, extended run, snmp, webcard, 3u rack/tower, usb, db9 serial model number: SMX5000XLRT3U description 5000va line interactive ups system for server, network and telecommunications equipment. 5kva ups with internal batteries installs in only 3 rack spaces with a depth of only 635mm / 25 inches. high 98% line-power efficiency rating reduces energy consumption and btu heat output. expandable battery runtime with optional bp48v24-2u (limit 1), bp48v60rt-3u (multi-pack compatible) and bp48v27-2us (multi-pack compatible) external battery packs. uninterruptible power supply (ups) switches to battery-derived ac output during power failures and extreme voltage variations. line interactive automatic voltage regulation (avr) offers voltage boost during brownouts and voltage reduction during overvoltage conditions to maintain regulated 230v output over an input range of 170-282v. supports hardwire input. includes c19 and c13 output receptacles. network-grade ac surge and noise suppression. network management interfaces support communications via usb, db9 serial and snmpwebcard slot. supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once. includes poweralert monitoring software and complete cabling. emergency power off (epo) interface. 3-stage metered current monitoring and battery charge status leds. utility power and voltage regulation leds. audible alarm. self-test. 4-post rackmount installation accessories included; 2-9ustand tower kit and 2postrmkitwm two post rack mounting accessories available. field-replaceable, hot-swappable internal batteries and external battery packs. features 5000va/3750 watt max. output power capacity compatible with international 230v input voltage 3u rack/tower ups installs in standard 19 inch rack enclosures with an installed depth of only 635mm / 25in protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges line interactive automatic voltage regulation (avr) corrects 230v nominal input from 170 to 282vac to usable 230v levels without consuming battery power avr circuits boost undervoltages from 170 to 199v by 12% and reduce overvoltages from 245 to 282v by 12% network interfaces support simultaneous communications via usb, db9 serial or contact closure and snmpwebcard slot included poweralert ups monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over ip communications ports support on-battery, low-battery, power-restored, ac-voltage, dc-voltage, output current monitoring, battery charge current, battery highlights 5kva / 5000va line interactive 3u rack/tower ups; sine wave output 230v nominal output during brownouts to 170v and overvoltages to 282v usb, serial, epo & optional snmp/web card monitoring options 3u all-in-one chassis; 98% efficiency hardwire input; 8 c13 & 3 c19 outlets package includes SMX5000XLRT3U ups system poweralert software and cabling mounting hardware for 4 post rackmount installation warranty information instruction manual 1 / 5
capacity, internal ups temperature, ac line frequency, timed inverter shutoff and activate self-test built-in emergency power off (epo) interface with cable sine wave output in ac and battery mode expandable runtime with optional bp48v24-2u (limit 1), bp48v60rt-3u (multi-pack compatible) and bp48v27-2us (multi-pack compatible) external battery packs half/full load runtime of 27/10 minutes with internal batteries includes 11 output receptacles (3 c19/8 c13) hardwire input ac connection 3 stage metered leds offer current monitoring and battery charge level mains power and voltage regulation leds offer at-a-glance power status information front panel switches support self-test and alarm cancel functions included adjustable mounting rails support installation in 4 post 19 inch racks supports 2 post rackmount installation with optional 2postrmkit accessory supports upright tower placement with optional 2-9ustand accessory ce, gost, saso listed specifications output output volt amp capacity (va) 5000 output kva capacity (kva) 5 output watt capacity (watts) 3750 output kw capacity (kw) 3.75 power factor 0.75 nominal output voltage(s) supported 220v; 230v; 240v nominal voltage details 230v nominal inverter output voltage frequency compatibility 50 / 60 hz output voltage regulation (line mode) -17%, +8% output voltage regulation (battery mode) +/- 5% output receptacles (8) c13; (3) c19 included output power cables includes 3 c13 to c14 output power cables output circuit breakers 15a (x3) breaker supports 1 c19 outlet each, 10a (x2) breaker supports 4 c13 outlets each output ac waveform (ac mode) sine wave output ac waveform (battery mode) pure sine wave input rated input current (maximum load) 27a 2 / 5
nominal input voltage(s) supported 230v ac ups input connection type hardwire ups input connection description hardwire input supports international 230v input (l, n, pe) input phase single-phase battery full load runtime (min.) 8.5 min. (3750w) half load runtime (min.) 20 min. (1875w) expandable battery runtime extended runtime supported via optional external battery packs external battery pack compatibility bp48v24-2u (limit 1); bp48v60rt-3u (multi-pack compatible); bp48v27-2us (multi-pack compatible) dc system voltage (vdc) 48 battery recharge rate (included batteries) less than 4 hours from 10% to 90% (typical, full load discharge) internal ups replacement battery cartridge rbc94-3u (quantity 3) battery access front panel battery access door battery replacement description hot-swappable, user replaceable batteries voltage regulation voltage regulation description automatic voltage regulation (avr) maintains line power operation with an input voltage range of 170 to 282 overvoltage correction input voltages between 245 and 282 are reduced by 12% undervoltage correction input voltages between 170 and 199 are boosted by 12% user interface, alerts & controls switches 2 switches control off/on power status and alarm-cancel/self-test operation alarm cancel operation power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status audible alarm audible alarm indicates power-failure, overload and low-battery conditions led indicators 5 leds indicate line power, battery power, overload, voltage regulation and battery low/replace status surge / noise suppression ups ac suppression joule rating 480 ups ac suppression response time instantaneous emi / rfi ac noise suppression yes physical installation form factors supported with included accessories 4 post 19 inch rackmount 3 / 5
installation form factors supported with optional accessories 2 post rackmount (2postrmkitwm); tower (2-9ustand) primary form factor rackmount ups power module dimensions (hwd, in.) 5.2 x 17.5 x 25 ups power module dimensions (hwd, cm) 13.3 x 44.4 x 63.5 installed whole system maximum rack depth (in.) 25 installed whole system maximum rack depth (cm) 63.5 rack height (u spaces) 3 ups power module weight (lbs.) 143 ups power module weight (kg) 64.9 ups shipping dimensions (hwd / in.) 11.3 x 23 x 31.5 ups shipping dimensions (hwd / cm) 28.6 x 58.4 x 80 shipping weight (lbs.) 182 shipping weight (kg) 82.6 cooling method fans ups housing material steel environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius relative humidity 0 to 95%, non-condensing ac mode btu / hr. (full load) 271 ac mode efficiency rating (100% load) 98% communications communications interface usb; db9 serial; epo (emergency power off); slot for snmp/web interface network monitoring port description supports detailed monitoring of ups and site power conditions poweralert software included communications cable usb and db9 cabling included watchdog compatibility supports watchdog application, os and hard-reboot restart options for remote applications line / battery transfer transfer time 7 ms (ac to battery); 1 ms (battery to ac) typical 4 / 5
low voltage transfer to battery power (setpoint) 170 high voltage transfer to battery power (setpoint) 282 special features grounding lug back panel grounding lug cold start (startup in battery mode during a power failure) cold-start operation supported high availability ups features hot swappable batteries green energy-saving features greater than 95% efficiency - green ups certifications ups certifications ce ups certification details class a (emi) warranty product warranty period (international) 2-year limited warranty product warranty period (mexico) 2-year limited warranty product warranty period (puerto rico) 2-year limited warranty ? 2015 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 5 / 5
|
